Kaxite manufacture reliable products, provide the most preferential prices, reasonable delivery time, full technical support. Let the largest value-added products in the hands of you and your customers.
Kynol Fiber Packing Braided from high-performance KynolTM ( NovilidTM or PhenolicTM) fiber impregnated with PTFE lubricant, good mechanical properties combining softness and strength. We call it "GOLDEN Packing".
Easy To Use Multi Angle Anvill Cutter For Gasket and Trim, Great Tool For Glazer Cuts Through Trims, Upvc Gasket, Conduit, Beading, Plastic Pipe and Picture Moldings
PTFE Filament Packing Braided from sintered and high stretched PTFE multifilament yarns. Within PTFE impregnation. Good resistance to compression and extrusion, high structural and cross-sectional density.
OFHC Copper Gaskets for CF Flanges To make a leak tight UHV seal between two conflat flanges, a gasket is required. OFHC (oxygen free high conductivity) copper is normally used as this sealing material as it is very clean, can easily be formed to shape, has a wide temperature range, and has a low outgassing rate.
Graphite Sheet with Metal Mesh is made of expanded flexible graphite Kaxite B201, reinforced by a metal mesh of SS304 or SS316 or CS, graphite content of more than 98%, the density is 1.0g/cm
Discover the essential features a high-quality grooving machine for SWG outer rings should have in order to ensure precise, consistent, and efficient grooving operations.
The nuclear reactor of graphite board as the core structure includes: Graphite Sheets water and cold stacks (graphite boards are used as deceleration materials and thermal carriers), graphite board gas -cold piles (Graphite Sheets are used as deceleration materials, carbon dioxide or gas are thermal carriers), graphite board high temperature Qi-cooled piles (usually used as a thermal carrier with ghosts, the temperature of the pyrine can reach about 1000 ° C), the sodium plate sodium reactor (sodium is the thermal carrier), and the graphite plate slowly proliferate (U-TH conversion).
Generally, the rubber O-rings on the market have a circular cross-section. Compared with the skeleton oil seal, the structure is relatively simple. There is neither a skeleton nor a self-tightening spring. It relies on the flexibility and resilience of the rubber material itself to seal. If the installation is improper, there is a risk of leakage. If it is sealed in the fuel tank, it may cause the deterioration of the oil, the deterioration of the lubrication quality, aggravate the wear of the moving parts of the engine, and even cause major failures such as bearing damage. The following points should be noted when circling:
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
