Metal Jacketed Gasket Manufacturers

Generally, the rubber O-rings on the market have a circular cross-section. Compared with the skeleton oil seal, the structure is relatively simple. There is neither a skeleton nor a self-tightening spring. It relies on the flexibility and resilience of the rubber material itself to seal. If the installation is improper, there is a risk of leakage. If it is sealed in the fuel tank, it may cause the deterioration of the oil, the deterioration of the lubrication quality, aggravate the wear of the moving parts of the engine, and even cause major failures such as bearing damage. The following points should be noted when circling:

The heat shrinkable tape is an important anticorrosive material which is compounded by its radiation crosslinked polyethylene substrate and hot melt adhesive.

Metal tooth-shaped gasket is a kind of solid line metal gasket, which is generally produced and processed on the two sides of the metal flat gasket with a high-precision CNC lathe or a special CNC lathe to form a wave-shaped silver shape with a 90-degree intersection angle in the same boat.

The octagonal gasket is a solid metal gasket with an octagonal cross-sectional shape by forging, heat treatment and machining of metal materials. It has a radial self-tight sealing effect. It depends on the contact between the gasket and the inner and outer surfaces (mainly the outer side) of the flange trapezoidal groove, and is pressed to form a seal. The general materials used are: carbon steel, stainless steel 304, 316, etc.

Types of gaskets and their scope of application Types of gaskets and their scope of application Various types of machinery and equipment, especially various types of pressure vessels, pipes and valves, generally use gasket sealing structures. The simpler gasket is a flat gasket, and the entire gasket is composed of the same material, which is used for static sealing of common joint surfaces of mechanical equipment, such as the sealing of gearboxes.