Graphite PTFE and Aramid Fiber in Zebra Braided Packing consisting of Kaxite Graphite packing yarns and aramid fiber. Compared to P308B, it has excellent lubrication ability and thermal conductivity.
Aramid fiber packing braided from high quality Dupont aramid and kevlar fiber with PTFE impregnated and lubricant additive. It is wear resistant but may damage the shaft is not used properly. A minimum shaft hardness of 60HRC is therefore recommended.
Flexible Graphite Packing with Corrosion Inhibitor is braided from expanded graphite yarn with corrosion inhibitor, it has the similar performance compared with other graphite packing. But the corrosion inhibitor acts as a sacrificial anode to protect the valve stem and the stuffing box. This packing does not harm the shaft to save the cost for replacement of shaft
Inconel wire reinforced flexible graphite braided packing is braided from each graphite yarn reinforced with an inconel wire. Combines the benefits of braided packing with the sealing efficiency of pre-formed pure graphite rings; high pressure- and extrusion resistance; excellent thermal conductivity; suitable for a wide temperature range
Kaxite Graph-super® P405-WWM Graphite Packing Similar as Kaxite P405. High-temperature High-pressure Valves Special Graphite Packing is braided from graphite yarn with metal alloy wire and glass fiber casing like shell outside. All-metal coated structures greatly increased the erosion resistant of packing, make packing more compact, more robust, long life.
Super Graphite Packing specially for high pressure valves, Super Graphite Valve Packing braided from expanded graphite yarns with corrosion inhibitor, reinforced with inconel wire. Each yarn is round braided with inconel mesh outside again. The mesh is jacketed.
